Many owners in the purchase of accessories very carefully, but easy to forget after the installation of accessories maintenance, so that the car driving journey gradually increased circumstances, the accessories are very vulnerable to wear and tear, the use of time in the continuous shortening. The following provides you with nine accessories maintenance precautions, only for the owner reference.
Maintenance tips one: avoid washing
For the engine paper air filter, can not use any oil cleaning; for leather parts, it is not appropriate to use oil cleaning.
Maintenance tips two: avoid oil
Engine dry air filter paper filter, such as stained with oil, easy to make the concentration of the mixture into the cylinder, so that the amount of air, fuel consumption increases, the engine power down; if the triangle tape stained with oil, Will accelerate its corrosion aging; brake shoes, dry clutch friction plate, brake belt and other stained with oil, will threaten traffic safety.
Maintenance tips three: to avoid heat
The engine piston temperature is too high, easy to lead to overheating and burning cylinder; rubber seals, triangular tape, tires and other overheating, easy to premature aging, performance degradation, shorten the service life; engines, generators, regulators and other electrical equipment Coil overheating, easy to burn and scrapped.
Maintenance tips of the four: avoid pressure
Tire tires if the long-term pressure storage and not timely flip, it will be deformed due to extrusion; air filter, fuel filter paper filter, such as the extrusion, and can not play a reliable role in filtering; Rubber oil seal, triangular tape, tubing, etc. can not be squeezed.
Maintenance tips five: avoid dirty
Fuel filter, oil filter, air filter, hydraulic oil filter and various types of filters and other parts if dirty, will lead to poor filtering effect. Water tank heat sink, air-cooled engine block and cylinder head heat sink, cooler heat sink and other parts too dirty, will lead to poor heat, the temperature is too high.
Maintenance tips six: to avoid anti
Engine cylinder pad can not be installed in the installation can not be reversed; otherwise, will cause the cylinder pad premature ablation damage; engine fan blade installation can not be reversed; on the direction of the tires, tonal tires, The word pointed to the rear.
Maintenance tips seven: avoid duplication
Some parts should be used once, individual drivers or repair workers in order to save or not understand the taboo and re-use, so easily lead to accidents.
Maintenance of the eight: to avoid fire
Tires, triangular tape, cylinder block water ring, rubber oil seal and other rubber products, if close to the fire, will easily aging deterioration or damage, on the other hand may also cause a fire accident.
Maintenance tips nine: avoid missing
Engine bolts, flywheel bolts, drive bolts mounted on the drive shaft bolts, locking screws, inserts, or the like, which are installed in pairs, such as missing or missing, Spring pad and other anti-loose device, once missed, in use will likely lead to serious failure occurred.